Precision Engine Lathe

PRODUCT CODE : MW0700-057

• FEATURES

• DESCRIPTION

  • Heavy duty geared head; hardened and ground gears.
  • 82mm. 86mm. 3-3/8inch hole through spindles.
  • 3-point supported spindle using 2 precision taper roller bearings and 1ball bearing.
  • 12 steps spindle speeds 20 – 1800 rpm. shift in geometric progression.
  • Quick-change universal gearbox for inch, metric, DP, MP,threading, and multiple thread.
  • Forced spray lubrication system used for headstock.
  • One shot lubrication pump supply oil to cross slide and bed-ways.
  • Adjustable overload clutch in apron to ensure proper cutting load.
  • Cross slide screw permanently immersed in oil and supported by thrust bearing.
  • Induction hardened and precision ground bed-way.
  • One piece base for maximum rigidity.

• SPEC
  View Product Spec

  Precision Engine Lathe

  	MODEL MW0700-057		1740 1740V	1760 1760V	1780 1780V	2040 2040V	2060 2060V	2080 2080V
  NOMINAL SIZE	Swing over Bed		440mm 17-5/ 16in			510mm 20in
  	Swing over Cross Slide		272mm 10-3/ 4in			342mm 13-1/ 2in
  	Height of Center		220mm 8-5/ 8in			255mm 10in
  	Distance Between Centers		1000mm 40in	1500mm 60in	2000mm 80in	1000mm 40in	1500mm 60in	2000mm 80in
  BED	Width of Bedways		330mm 13in
  	Total Length of Bed		2000mm 78in	2510mm 98in	3020mm 118in	2000mm 78in	2510mm 98in	3020mm 118in
  	Gap Type	Swing over Gap	660mm 26in			730mm 28-3/ 4in
  		Length of gap	300mm 11-3/ 4in			300mm 11-3/ 4in
  		Width in front of face plate	190mm 7-1/ 2in			175mm 6-3/ 4in
  SPINDLE	Spindle nose mounting		D1-8CAMLOCK
  	Spindle bore		82mm 3-1/ 4in
  	Taper of spindle bore		M.T.#5
  	Number of spindle speeds		12 steps (Variable speed change 3 steps)
  	Range of spindle speeds		20-1800 R.P.M. (Variable speed change 10-2000 R.P.M.)
  TOOL SLIDE	Total travel of cross slide		260mm 10-1/ 4in
  	Total travel of top slide		130mm 5-1/ 8in
  	Max. size cutting tool		25mm 1in
  TAIL STOCK	Total travel of tailstock barrel		150mm 6in
  	Taper in tailstock barrel		M.T.#5
  	Diameter of barrel		65mm 2-9/ 16in
  THREADS	Lead screw diameter & pitch		Dia. 35mm 1-3/8inPitch : 6mm 4 T.P.I.
  	Number of inch threads		48
  	Range of inch threads		2-72 TPI
  	Number of metric pitches		48
  	Range of metric pitches		0.2 -14 mm
  	Number of Diametral pitches		24
  	Range of Diametral pitches		8-60 D.P.
  	Number of Module pitches		24
  	Range of Module pitches		0.2 -3.5 M .P.
  FEEDS	Feed rod diameter		25mm 1in
  	Number of feed change		36
  	Range of longitudinal feeds		0.06 -2.00mm /rev.0.0025 -0.07in /rev.
  	Range of cross feeds		0.03 -0.80mm /rev.0.0010 -0.03in /rev.
  MOTOR	Main spindle motor		10 HP 7kw
  	Coolant pump motor		1/8 HP 0.1Kw
  	Machine net weight		1900 kgs	2000 kgs	2200 kgs	2000 kgs	2100 kgs	2300 kgs

  • The product pictures are for your reference only: final spec & accessories based on formal quotation